account
Account panel
Sign in with your e-mail address and the password you chose after confirming it.
Have a panel token from an account opened before sign-in existed? Use it here.
Paste your panel token: the one shown once, on the page you reached from the confirmation mail. It is not in the mail itself, because a mail is not a channel a reusable secret may travel on.
New here? Create an account — the Free plan needs no card. You get one confirmation mail, then you choose a password.
Lost the token? We cannot recover it — it is replaced with a new one. Write to us from the address the account is registered to.
Account
Getting started
A few steps take a new account to its first masked request. Each one is ticked by what the account has really done.
Usage this period
| Period | — |
|---|---|
| Characters | — |
| Requests | — |
| Plan used | — |
| Estimated amount | — |
The amount comes from the counter, never from a declaration. It is an estimate — the invoice is issued once the period closes.
Needs attention
Nothing needs your attention.
Account status
Loading…
Close account
Closing stops masking and revokes your keys. On a paid plan it takes effect at the end of the period you paid for, and nothing further is charged; until then you can keep the account. Invoices stay in this panel; your settings are deleted 30 days after the account closes.
Gateway keys
| Label | Minted | State | Usage group |
|---|
Using the browser add-on with this key? What it reports is in the Add-on activity log.
Usage groups
Group keys by how they are used — the browser add-on, agents and MCP, chat apps through the proxy, a back-end service — and give each group its own settings. A key in a group gets the group’s settings where the group sets them and the account’s everywhere else; a request header cannot move a key to another group.
Add-on policy
What every browser of your organisation is locked to. Once you save it, the add-on reads it from the gateway with the organisation's key and applies it; people see “Managed by your organisation” and cannot change any of it. Until you save one, each person keeps the add-on's own settings.
Settings for one browser
Give a single browser settings of its own, laid over the policy above; that browser shows them as “settings for this browser”. Only what you change here differs — everything else stays as the organisation's policy. Pick the browser from the activity log below (by the name you gave it there), or paste the 26-character installation id the add-on shows in its options.
| Browser | Own settings |
|---|
Add-on activity log
Is the browser add-on protecting your organisation, and did anything go out unmasked? This is what the add-on reports about itself. It never holds content: no prompt text, no values, no file names.
Browsers
| Browser | Status | Last check-in | Needs attention |
|---|
Names are kept in this browser only; the shop stores nothing about your add-ons.
Activity
More filters
| When | What happened | Browser | Details |
|---|
About this log
Each browser is a random ID made when the add-on was installed: no person is named. Besides pauses and removals the log carries the type of a file sent unmasked, the names of changed settings and administrator sign-ins. A browser that has not checked in for a few days was closed, or the add-on was removed or switched off. Check-ins are summarised in the Browsers table and left out of the activity list, which shows the latest 100 events.
Retention: the gateway keeps these events for 30 days, separately on each of its replicas, and a restart of a replica empties it. The shop reads them when you open this page and stores none of them, so an export is the only copy you will have — download it if you need a record.
Masking choices
One choice to make before you start.
With it on, a person named in full once and mentioned by surname later gets the same token both times, so the model can follow who is who.
With it off, only the full mention is masked. The later surname on its own goes to the model as written, unless a rule catches it for another reason.
What it costs, measured. On our 1104-fragment
corpus of things that must survive masking, switching it on
masks 13 of them that would otherwise stay. All 13 are one shape:
a surname that is also an ordinary word of the language
(Kowal, Bauer, Bakker)
standing at the start of a sentence, where every word is
capitalised anyway. In English and Czech the figure was zero.
If your documents are full of such surnames, that cost lands on
every page; if they are not, it costs nothing.
Gateway settings
Everything else
Checked against the same contract the gateway uses — an entry the gateway would refuse will not save here either.
Plan
Payment
Loading…
Amount due
—
| Item | Due | Net |
|---|
You pay on the secure payment page of Mollie B.V. (Netherlands) and come back here. The VAT invoice is issued in the Polish National e-Invoicing System (KSeF) and appears under Invoices. A fee is due on the first day of its period; if it is not paid within three days, masking is suspended until it is, and your keys and settings are kept.
Hard limit
On: traffic stops once the plan is used up. Off: overage is added to the invoice. On by default, because a surprise invoice is churn plus a support ticket.
Billing details
Every payment is invoiced through the Polish National e-Invoicing System (KSeF). OBVELO is sold to businesses, so a payment needs the company the invoice names.
Poland: the company's NIP. Another EU country: the EU VAT number, which we confirm in VIES and invoice under reverse charge. If VIES does not answer, save again in a few minutes. Outside the EU: the number your company is registered under.
Invoices
| Invoice | Issued | Total | KSeF number | Copy |
|---|
1. Create a key
In the Keys tab, give the key a label and create it. It is shown once — copy it into your secret store. Every way of connecting below uses the same key.
2. Connect
Gateway address: not set on this shop — write to us for it
Proxy — change one base URL
Point your model provider's client at the gateway and add your OBVELO key as a header. Your provider key travels to the provider and is never stored.
from openai import OpenAI
client = OpenAI(
base_url="GATEWAY/v1",
api_key=os.environ["OPENAI_API_KEY"],
default_headers={"x-obvelo-key": os.environ["OBVELO_KEY"]},
)
The same works for Anthropic messages, Gemini contents and OpenAI responses, and for Mistral and compatibility gateways that speak the chat shape.
SDK — your model key never reaches us
TypeScript, Python and .NET. Download from Downloads, check the SHA-256 beside the file, and install from the file.
from pii_gateway import PiiGateway
from pii_gateway.openai import wrap_openai
gateway = PiiGateway("GATEWAY", os.environ["OBVELO_KEY"])
client = wrap_openai(OpenAI(), gateway)
MCP connector — for AI assistants
Claude Desktop: download the .mcpb file for your computer from Downloads and open it; it asks for the key. Any other MCP client: unzip the program into your home folder and check the key first:
PII_GATEWAY_URL=GATEWAY PII_GATEWAY_KEY=$OBVELO_KEY ~/obvelo-mcp/obvelo-mcp --doctor
Browser add-on — for people using an AI chat
Masks what a person types or attaches in an AI chat before it is sent. Included in every paid plan; see the add-on and its install steps in the documentation. What the add-on reports — installations, pauses, files sent unmasked — is in the Add-on activity log on the Add-on tab.
3. Read further
- Quickstart — the first request in five minutes
- Documentation — endpoints, proxy dialects, agents, files, limits
- SDKs — masking and restoring in your own process, streaming included
- MCP connector — every client, configured by hand
- Downloads — SDKs, connector and add-on, with checksums
- OpenAPI description — for generating a client
The documentation and downloads are on the OBVELO website, under Docs and Downloads.
Self-hosted gateway
Run the OBVELO gateway on your own server. Masking happens on your machine; we never receive what it masks. The volume limits come from the plan you choose.
The self-hosted gateway is not on sale yet. Contact us for a deployment or a trial.
14-day trial
Once per company, on the Standard plan's limits, for one server, with no grace period. It needs the company's EU VAT number confirmed in VIES (Billing tab) or, for a Polish company without one, its NIP confirmed in the official register below, and an address at the company's own domain; free-mail addresses cannot start one.
Buy
Servers
Licence
No licence yet. Start the trial or buy; a paid licence is issued once the balance is paid.
What happens when
Installation
The installer kit is handed over by OBVELO together with your pull token.
Pull token: issued by OBVELO for your account (our private image registry). It is not shown here yet; you receive it from us.
Install with obvelo install --licence FILE --server N; each machine gets its own number, up to the servers the licence covers. Automatic renewal (obvelo renewal on) sends us usage numbers only, never content.
Installations seen by automatic renewal
| Installation id | Month | Last report | Characters | Release |
|---|
Operator: self-hosted trials
Invite to the Free plan
Type the address of the person to invite. They get one message with a link to a Free account; the link works once and for 7 days. Opening it fills the address in, and they accept the Terms and choose a password — no separate confirmation.
Sent invitations
| Address | Sent | Expires | State | By |
|---|
An invitation is deleted 30 days after it was accepted or expired: the address belongs to somebody who is not a customer yet.